Hugendubel.info - Die B2B Online-Buchhandlung 

Merkliste
Die Merkliste ist leer.
Bitte warten - die Druckansicht der Seite wird vorbereitet.
Der Druckdialog öffnet sich, sobald die Seite vollständig geladen wurde.
Sollte die Druckvorschau unvollständig sein, bitte schliessen und "Erneut drucken" wählen.

Materials Testing for the Metal Forming Industry

BuchKartoniert, Paperback
226 Seiten
Englisch
Springererschienen am27.05.2012
This book is addressed to both research scientists at universities and technical institutes and to engineers in the metal forming industry. The general methods of materials testing, as far as they are not directly related to metal forming, are not considered in detail since many books are available on this subject.mehr
Verfügbare Formate
BuchKartoniert, Paperback
EUR106,99
E-BookPDF1 - PDF WatermarkE-Book
EUR96,29

Produkt

KlappentextThis book is addressed to both research scientists at universities and technical institutes and to engineers in the metal forming industry. The general methods of materials testing, as far as they are not directly related to metal forming, are not considered in detail since many books are available on this subject.
Details
ISBN/GTIN978-3-642-50243-9
ProduktartBuch
EinbandartKartoniert, Paperback
Verlag
Erscheinungsjahr2012
Erscheinungsdatum27.05.2012
Seiten226 Seiten
SpracheEnglisch
Gewicht427 g
IllustrationenXI, 226 p. 47 illus.
Artikel-Nr.28575240

Inhalt/Kritik

Inhaltsverzeichnis
1 Introduction.- 1.1 The System of Metal Forming.- 1.2 The Material before the Forming Process.- 1.3 Concluding Remarks.- 1.4 References.- 2 Determination of Flow Curves for Bulk Metal Forming.- 2.1 Basic Concepts.- 2.2 Tensile Test.- 2.3 Upsetting Test.- 2.4 Torsion Test.- 2.5 Determination of Flow Curves at Elevated Temperatures.- 2.6 Further Testing Methods for Determining Flow Curves.- 2.7 Critical Comparison of Testing Methods.- 2.8 References.- 3 Determining Flow Curves of Sheet Metal.- 3.1 Special Properties of Thin Sheet Metal.- 3.2 Tensile Test on Thin Sheet Metal.- 3.3 Plane Strain Deformation Tests.- 3.4 Hydraulic Bulge Test.- 3.5 Plane Torsion Test.- 3.6 Effects of Strain Rate and Temperature.- 3.7 Testing Superplastic Materials.- 3.8 Comparison of the Methods.- 3.9 Anisotropy.- 3.10 References.- 4 Transferability of Results.- 4.1 Basic Problem.- 4.2 Uncertainty of Experimentally Determined Flow Curves.- 4.3 Estimation of Flow Curves without Experiments.- 4.4 References.- 5 Determining the Limits of Formability.- 5.1 Basic Concepts.- 5.2 The Concept of Ductility .- 5.3 The Forming Limit.- 5.4 Process Simulation Testing Methods.- 5.5 References.- 6 Material and Workpiece after the Forming Process.- 6.1 Overview.- 6.2 Material Behavior during Production Processes after Metal Forming.- 6.3 Material Properties after Macroscopically Homogeneous Deformation.- 6.4 Properties of Workpieces after Metal Forming.- 6.5 References.- 7 Testing Tool Materials for Bulk Metal Forming.- 7.1 Introduction.- 7.2 State of Knowledge about Tool Fracture for Bulk Metal Forming.- 7.3 Materials Testing for Tool Life Estimation.- 7.4 Application of Fracture Mechanics for Evaluating Tool Materials for Hot Forming.- 7.5 Examples of Tool Life Estimation for Cold Bulk Metal Forming.-7.6 References.- Appendix A: Supplements to the Theory and Practice of Torsion Tests.- A.1 Torsion Test on Bars.- A. 1.1 Determination of the Zero Approximation of the Flow Curve.- A. 1.2 Taylor Series Expansion of the Correction Function .- A. 1.3 Use of Extremely Short Specimens.- A. 1.4 Recommended Specimen Geometry.- A. 1.5 Possible Sources of Error.- A.1.6 Determination of the Strain Rate Sensitivity.- A.2 Plane Torsion Test.- A.3 References.- Appendix B: Standards and Recommended Testing Procedures.- Appendix C: Chemical Composition and Comparative Designations of Steels.- Appendix D: Conversion Factors for Units.- Appendix E: Recommendations for an Uniform Procedure of Determining Flow Curves by Upsetting Cylindrical Specimens.mehr