Hugendubel.info - Die B2B Online-Buchhandlung 

Merkliste
Die Merkliste ist leer.
Bitte warten - die Druckansicht der Seite wird vorbereitet.
Der Druckdialog öffnet sich, sobald die Seite vollständig geladen wurde.
Sollte die Druckvorschau unvollständig sein, bitte schliessen und "Erneut drucken" wählen.

Mechanics of Composite Structural Elements

BuchGebunden
503 Seiten
Englisch
Springererschienen am19.04.20182. Aufl.
The book is close to classical courses of "Strength of Materials" and "Theory of Beams, Plates and Shells" but it extends the classic content on two topics: the linear elastic material behavior of isotropic and non-isotropic structural elements, and inhomogeneous material properties in the thickness direction.mehr
Verfügbare Formate
BuchGebunden
EUR117,69
BuchKartoniert, Paperback
EUR85,59
E-BookPDF1 - PDF WatermarkE-Book
EUR85,59
E-BookPDF1 - PDF WatermarkE-Book
EUR96,29

Produkt

KlappentextThe book is close to classical courses of "Strength of Materials" and "Theory of Beams, Plates and Shells" but it extends the classic content on two topics: the linear elastic material behavior of isotropic and non-isotropic structural elements, and inhomogeneous material properties in the thickness direction.
Zusammenfassung
Offers a systematic introduction to the structural mechanics of composite components

Focuses on modeling and calculation of sandwiches and laminated composites i.e. anisotropic material

All chapters include examples with worked-out solutions

Thoroughly explains analytical and numerical solution methods
Details
ISBN/GTIN978-981-10-8934-3
ProduktartBuch
EinbandartGebunden
Verlag
Erscheinungsjahr2018
Erscheinungsdatum19.04.2018
Auflage2. Aufl.
Seiten503 Seiten
SpracheEnglisch
Gewicht932 g
IllustrationenXVI, 503 p. 121 illus.
Artikel-Nr.44485643

Inhalt/Kritik

Inhaltsverzeichnis
1. Classification of Composite Materials.- 2. Linear Anisotropic Materials.- 3. Effective Material Moduli for Composites.- 4. Elastic Behavior of Laminate and Sandwich Composites.- 5. Classical and Improved Theories.- 6. Failure Mechanisms and Criteria.- 7. Modelling and Analysis of Beams.- 8. Modelling and Analysis of Plates.- 9. Modelling and Analysis of Circular Cylindrical Shells.- 10. Modelling and Analysis of Thin-walled Folded Structures.- 11. Finite Element Analysis.mehr

Schlagworte

Autor


Holm Altenbach (1956) is since 2011 a Full Professor at the Faculty of Mechanical Engineering at the Otto-von-Guericke-University Magdeburg, Germany. Having obtained a Diploma Degree (1980) and a Doctoral Degree (1983) at the Leningrad Polytechnic he received the Facultas docendi in Engineering Mechanics in Magdeburg. In 1987 he obtained the Doctor of Engineering Sciences (Dr.-Ing.habil.) at the Leningrad Polytechnic. From 1987 up to 1995 he worked as a lecturer in the Institute of Material Science at the Magdeburg University. In 1996 he was appointed as a Full Professor in Engineering Mechanics at the Martin-Luther-University Halle-Wittenberg. His research activities were awarded by the Krupp fellowship (Ruhr-University Bochum), the Gold medal of the Faculty of Mechanical Engineering of the Politechnika Lubelska (Lublin, Poland) and Dr.h.c. at the NTU Kharkiv Polytechnic Institute (Ukraine), the Ovidius University Constanta (Romania) and the Vekua Institute of the Ivane Javakhishvili Tbilisi State University (Georgia). He acts as Editor-in-chief of Zeitschrift für Angewandte Mathematik und Mechanik (ZAMM, founded 1921) and Advisory Editor of Continuum Mechanics and Thermodynamics .

Johannes Altenbach (1933) was Full Professor at the Faculty of Mechanical Engineering at the University of Technology Otto von Guericke Magdeburg, Germany. Having obtained a Diploma Degree in Mathematics (1957) at University of Leipzig, a Doctoral Degree (1961) and in 1967 a Doctor of Engineering Sciences (Dr.-Ing.habil.) in Magdeburg. From 1957 up to 1968 he worked as an assistant and lecturer in the Institute of Mechanics, later in the Institute of Statics and Steel Structures at the Magdeburg University. In 1968 he was appointed as a Full Professor in Engineering Mechanics at the University in Magdeburg. His research activities were awarded by Dr.h.c. at the NTU Kharkiv Polytechnic Institute (Ukraine). He acts as Editor-in-chief of Technische Mechanik (founded 1980). He was retired in 1992.



Wolfgang Kissing (1938) was a Professor of Engineering Mechanics/Strength of Materials at the University of Applied Sciences Wismar, Germany. Having obtained a Diploma Degree in Mechanical Engineering (1962), a Doctoral Degree (1967) and in 1982 a Doctor of Engineering Sciences (Dr.-Ing.habil.) at the University of Technology Otto von Guericke Magdeburg. From 1962 up to 1970 he worked as an assistant in the Institute of Statics and Steel Structures at the Magdeburg University. In 1970 he was appointed as an Associate Professor in Wismar, where he obtained a professorship in 1990. He was retired in 2004.