Hugendubel.info - Die B2B Online-Buchhandlung 

Merkliste
Die Merkliste ist leer.
Bitte warten - die Druckansicht der Seite wird vorbereitet.
Der Druckdialog öffnet sich, sobald die Seite vollständig geladen wurde.
Sollte die Druckvorschau unvollständig sein, bitte schliessen und "Erneut drucken" wählen.

Advances in Thermal Engineering

Select Proceedings of ICFAMMT 2024
BuchKartoniert, Paperback
376 Seiten
Englisch
Springererschienen am28.08.20242024
The 2nd International Conference on Futuristic Advancements in Materials, Manufacturing and Thermal Sciences (ICFAMMT-2024) was jointly organized by the Department of Mechanical and Aerospace Engineering, Institute of Infrastructure, Technology, Research and Management (IITRAM), Ahmedabad, India, and the Space Society of Mechanical Engineers (SSME), Space Applications Centre, ISRO, Ahmedabad. This conference aims to provide splendid opportunities for academicians, researchers, industrial persons, and young scientists to address new challenges and discuss futuristic advancements in materials, manufacturing, and thermal sciences.This book includes select peer-reviewed proceedings of the 2nd International Conference on Futuristic Advancements in Materials, Manufacturing and Thermal Sciences (ICFAMMT 2024). The contents of this book provide an overview of the latest research in the area of thermal and fluid sciences such as computational and numerical methods in fluid flow and heat transfer, advanced energy systems, battery thermal management system, technologies for space, and aerospace applications, supersonic combustion, two-phase/multiphase flows, measurement and instrumentation for fluid flow and transport properties, micro/nano-scale fluid flow and heat transfer. The book is useful for researchers and professionals working in the field of thermal and fluid sciences.mehr
Verfügbare Formate
BuchKartoniert, Paperback
EUR181,89
E-BookPDF1 - PDF WatermarkE-Book
EUR213,99

Produkt

KlappentextThe 2nd International Conference on Futuristic Advancements in Materials, Manufacturing and Thermal Sciences (ICFAMMT-2024) was jointly organized by the Department of Mechanical and Aerospace Engineering, Institute of Infrastructure, Technology, Research and Management (IITRAM), Ahmedabad, India, and the Space Society of Mechanical Engineers (SSME), Space Applications Centre, ISRO, Ahmedabad. This conference aims to provide splendid opportunities for academicians, researchers, industrial persons, and young scientists to address new challenges and discuss futuristic advancements in materials, manufacturing, and thermal sciences.This book includes select peer-reviewed proceedings of the 2nd International Conference on Futuristic Advancements in Materials, Manufacturing and Thermal Sciences (ICFAMMT 2024). The contents of this book provide an overview of the latest research in the area of thermal and fluid sciences such as computational and numerical methods in fluid flow and heat transfer, advanced energy systems, battery thermal management system, technologies for space, and aerospace applications, supersonic combustion, two-phase/multiphase flows, measurement and instrumentation for fluid flow and transport properties, micro/nano-scale fluid flow and heat transfer. The book is useful for researchers and professionals working in the field of thermal and fluid sciences.
Details
ISBN/GTIN978-981-97-4499-2
ProduktartBuch
EinbandartKartoniert, Paperback
Verlag
Erscheinungsjahr2024
Erscheinungsdatum28.08.2024
Auflage2024
Seiten376 Seiten
SpracheEnglisch
Gewicht657 g
IllustrationenX, 376 p. 275 illus., 235 illus. in color.
Artikel-Nr.56418727

Inhalt/Kritik

Inhaltsverzeichnis
Chapter 1: Passive control of cylinder wake by a downstream splitter Plate placed behind critical gap ratio.- Chapter 2: Selection of cooling method for 3 kw sspa and numerical Study with different mesh levels.- Chapter 3: Effect of room temperature on thermal performance of PCM based heat sink coupled with heat pipe.- Chapter 4: A comparative study of various diffuser configurations on an AHMED BODY for improved aerodynamic performance using CFD.- Chapter 5: Flow characteristics study on aerospike nozzle for varying Lengths using CFD method.- Chapter 6: Computational study on heat transfer and fluid flow aspects of adsorption-based CO2 capture.- Chapter 7: Performance analysis of a helical reactor configuration for adsorbed natural gas storage.- Chapter 8: Risk assessment in thermal power plants - a review.- Chapter 9: Structural and thermal evaluation of electronic power conditioner (EPC) housing for space payload.- Chapter 10: Effect of battery inclination on the performance of a battery thermal management system. etc.mehr

Autor


Dr. Gautam Choubey is presently working as an Assistant Professor in the Department of Mechanical Engineering at the National Institute of Technology (NIT) Silchar Assam, India. Before joining NIT Silchar, he worked as an Assistant Professor in the Department of Mechanical and Aerospace Engineering at IITRAM, Ahmedabad (An Autonomous Govt. University), India from December 2019 to December 2023, as a senior assistant professor in the Mechanical Engineering Department at MITS-UGC Autonomous Institute, Andhra Pradesh, from October 2018 to November 2019, and as a temporary faculty, at NIT Silchar, from July 2017 to June 2018. He holds a Ph.D. in the field of supersonic combustion, an M.Tech in Thermal Engineering from the National Institute of Technology Silchar, Assam, India. He is working past 10 years on Computational Fluid Dynamics (CFD) modelling of supersonic compressible flow and authored over 50 publications in reputed journals (SCI/SCIE). His research interests mainly include scramjet combustion, supersonic combustion, turbulence modelling in high-speed flows, and shock-boundary layer interaction. Dr. Choubey´s name also figured among the top 2% researchers and scientists of the world in a report published by Stanford University, USA and Elsevier BV, Netherlands for the year 2023, 2022, and 2021.

Dr. Sumit Tripathi is currently working as an assistant professor in the Department of Mechanical and Aerospace Engineering at the Institute of Infrastructure, Technology Research and Management (IITRAM), Ahmedabad. He earned his Ph.D. jointly from IIT Bombay (India) and Monash University (Australia) in 2017. He has worked as a postdoctoral fellow at Monash University Australia during 2017-18, and as an Institute postdoctoral fellow at IIT Kanpur in 2019. He has more than eight years of experience in industry and academia. He has authored several papers in international journals, book chapters, and conference proceedings and has presented oral talks in conferences across India, Australia, Japan, and the USA. He is a life member of NSFMFP, ISHMT, IPA, ISTAM, ISTE, and SSME. His research interests include experimental and computational fluid dynamics, rheology of complex fluids, adsorption kinetics, and interfacial science.

V. K. Singh is currently working as a scientist/engineer at Thermal Engineering Division of Space Applications Center, ISRO, Ahmedabad, India. He is working in the area of thermal design, analysis, and testing of spacecraft payloads. He worked at Propulsion Research & Studies Entity of Liquid Propulsion Systems Center, ISRO, Trivandrum, from the year 2007 till 2013, where he worked mainly in CFD analyses for engine/stage components and electric propulsion systems. He has research interests in heat transportation systems, phase change materials, Cryogenic, etc. He has published papers in several international journals and conference proceedings. He worked as a project manager (Thermal) for various payloads of ISRO like RISAT-2B, GSAT 20, 24, IDRSS, etc. He is the recipient of Dr. Wille Memorial Prize for the year 2007, conferred by the National Society of Fluid Mechanics & Fluid Power, India.

Dr. P. M. V. Subbarao received his Ph.D. from the Department of Mechanical Engineering, IIT Kanpur, India. Currently, he is a professor in the Department of Mechanical Engineering, at IIT Delhi. His research interests include analysis of supercritical vapour power cycles, steam generators, and turbines, experimental and computational analysis of heat transfer enhancement, flame tomography, thermodynamic analysis of organic power generation cycles, design and development of pico-hydel power plants for rural applications, and development of bio-fuel systems. He has published more than 150 papers in international journals and conferences as well as several book chapters and guided 30+ Ph.D. students.