Hugendubel.info - Die B2B Online-Buchhandlung 

Merkliste
Die Merkliste ist leer.
Bitte warten - die Druckansicht der Seite wird vorbereitet.
Der Druckdialog öffnet sich, sobald die Seite vollständig geladen wurde.
Sollte die Druckvorschau unvollständig sein, bitte schliessen und "Erneut drucken" wählen.

Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 5

E-BookPDF1 - PDF WatermarkE-Book
Englisch
Springer International Publishingerschienen am26.02.20242024
Mechanics of Composite, Hybrid, and Multifunctional Materials, Volume 5 of the Proceedings of the 2023 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fifth volume of five from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including:

Advances in Composites

Recycled Composites

Tunable Materials

Damage Detection in Composites

Multifunctional Composites

Fracture and Failure in Complex Materials



Frank Gardea-U.S. Army Research Laboratory, MD, USA; Kunal Mishra-Corning Incorporated, NY, USA; Michael Keller-University of Tulsa, OK, USAmehr
Verfügbare Formate
BuchGebunden
EUR235,39
E-BookPDF1 - PDF WatermarkE-Book
EUR223,63

Produkt

KlappentextMechanics of Composite, Hybrid, and Multifunctional Materials, Volume 5 of the Proceedings of the 2023 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fifth volume of five from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including:

Advances in Composites

Recycled Composites

Tunable Materials

Damage Detection in Composites

Multifunctional Composites

Fracture and Failure in Complex Materials



Frank Gardea-U.S. Army Research Laboratory, MD, USA; Kunal Mishra-Corning Incorporated, NY, USA; Michael Keller-University of Tulsa, OK, USA

Inhalt/Kritik

Inhaltsverzeichnis
Chapter 1. Deformation and Flow Characterization of Hybrid Woven Composite Material.- Chapter 2. Development of Recycled Alumix431 based Composites reinforced with TiB2, TiC and B4C Fine Ceramic Powders for Aircraft Applications Produced by Combined Method: Sintering + Forging.- Chapter 3. Static and Fatigue Behaviour of Recycled Thin Sheet "Ti-Al-Nb" based Composites produced by Hot Forging Diffusion Process.- Chapter 4. Development of Self-healing Glass Fiber Reinforced Laminate Composites for Wind Turbine Blades.- Chapter 5. Development of Recycled Aluminium (AA7075+AA1050) Based Hybrid Composites Reinforced with Recycled Rice Husk Produced by Sinter Forging.- Chapter 6. Development of Ni-Al Based Composites Reinforced with Recycled AA7075+AA1050 and Ceramics produced by Sinter Forging Process.- Chapter 7. Design of recycled "A356-A7075" Matrix Composites reinforced with "Nb2Al - Zr" produced by Sinter Forging.- Chapter 8. Dynamic Piezoresistive Behaviour of Composite Materials: Experimental Testing and Analytical Modelling.- Chapter 9. Investigating the Fracture Resistance of Carbon Fiber-PEEK Composites Produced via Fused Filament Fabrication.- Chapter 10. Investigating the Mechanical Performance of Vitrimers reinforced with Hollow Glass Beads using Digital Image Correlation Technique.- Chapter 11. Intermediate Strain Rate Behavior of a Polymer-Particle Composite with High Solids Loading.- Chapter 12. Mesoscale Modeling to Predict Dynamic Impact Response of Plain Weave Composites.mehr

Autor