Produkt
KlappentextThis book highlights recent research progress in lead (Pb)-free solder technology, focusing on materials development, processing, and performances. It discusses various Pb-free solder materials' development, encompassing composite solders, transient liquid phase sintering, and alloying. The book also details various Pb-free solder technology processing and performances, including flux modification for soldering, laser soldering, wave soldering, and reflow soldering, while also examining multiple technologies pertaining to the rigid and flexible printed circuit board (PCB). Some chapters explain the materials characterization and modeling techniques using computational fluid dynamics (CFD). This book serves as a valuable reference for researchers, industries, and stakeholders in advanced microelectronic packaging, emerging interconnection technology, and those working on Pb-free solder.
Mohd Arif Anuar Mohd Salleh (Ph.D.) is an associate professor of materials engineering at the Faculty of Chemical Engineering Technology, Universiti Malaysia Perlis. He graduated with a B.Eng (Hons) in Mechanical Engineering, followed by M.Eng in Mechanical Engineering majoring in Materials at the Universiti Tun Hussein Onn Malaysia. He received his Ph.D. from the University of Queensland, Australia, in Materials Engineering, specializing in the development of advanced solder materials. He is also a certified Professional Engineer and a corporate member of the Institute of Engineers, Malaysia (IEM). He is currently the Chairman of Tin Solder Technology Research Malaysia under the Tin Industry Board (Research and Development), Malaysia. He worked in and lectured on the subject of electronic packaging materials for more than 14 years. Before joining Universiti Malaysia Perlis, he was employed as a Failure Analysis Engineer at Intel Malaysia. He also worked part-time research officer for a few research projects on solder materials development at the University of Queensland Australia (2013-2015) and Imperial College London (2015). He has published more than 190 articles, encompassing proceedings, journals, books, and modules as primary author and co-author, and has an H-index of 16. His research endeavors were significant and impactful, as reflected in his receiving grants worth RM5.5 million.
Mohd Sharizal Abdul Aziz (Ph.D) received the B.Eng, M.Sc., and Ph.D. degrees from the Universiti Sains Malaysia, in 2006, 2012, and 2015. In June 2016, he became a Senior Lecturer at the School of Mechanical Engineering, Engineering Campus, Universiti Sains Malaysia, Penang, Malaysia. Sharizal is the author or co-author of more than 100 papers in the international journal, book chapter, and conference proceeding with the current H-index 9. He has given numerous invited/ keynote talks at international conferences. Sharizal also organized workshops on Soldering & SMT processes for academics and professionals in collaboration with the microelectronics industries in Malaysia. His research interest in Thermofluids and Computational Fluid Dynamics, focusing on Soldering, Surface Mount Technology, and Advanced Packaging. He also registered with the Board of Engineers Malaysia and a fellow Electronics Packaging Research Society, Malaysia.
Azman Jalar (Ph.D) is a professor of applied metallurgy from the Faculty of Science and Technology, and Principal Research Fellow in electronics packaging at the Institute of Microengineering and Nanoelectronics, Universiti Kebangsaan Malaysia. Graduated with PhD degree in metallurgy and materials from School of Metallurgy and Materials, University of Birmingham, UK in 2001. His interest in microstructure-properties-performance or materials science paradigm motivates him to conduct research in electronic packaging since 2002. He also interested in electronic materials, nanomaterials, materialography and stereometry. He has significantly contributed in solving many industrial-related semiconductor packaging problems through industry-driven research activities. Past and current research projects including packaging materials, solder materials and soldering, wire bonding and package architecture. Past projects collaborated with Freescale, OnSemi, AIC semiconductor, Celestica, Jabil electronics and Infineon, and ongoing projects with Nexperia, Western Digital and RedRing Solder.
Mohd Izrul Izwan Ramli (Ph.D) received his PhD from the Universiti Malaysia Perlis (UniMAP) Malaysia in materials engineering majoring in the development of solder materials . Now he works as a postdoctoral researcher in Universiti Malaysia Perlis (UniMAP) working on several projects related to the development of solder materials. His current research interest is in materials engineering and focusing on the development of lead-free solder alloys for electric/electronic interconnects. His research activities including using advance material characterizations techniques such as the synchrotron imaging, synchrotron XRF and synchrotron tomography and have contributed to several leading discoveries in solder alloy development. He has published 57 journals in leading journals in his research area with total citation 179 and H-index: 9. He also received several international research grants as co researcher during his studies and postdoctoral period. He has now more than 5 patents and copyrights in the lead-free solder alloy area.
Mohd Arif Anuar Mohd Salleh (Ph.D.) is an associate professor of materials engineering at the Faculty of Chemical Engineering Technology, Universiti Malaysia Perlis. He graduated with a B.Eng (Hons) in Mechanical Engineering, followed by M.Eng in Mechanical Engineering majoring in Materials at the Universiti Tun Hussein Onn Malaysia. He received his Ph.D. from the University of Queensland, Australia, in Materials Engineering, specializing in the development of advanced solder materials. He is also a certified Professional Engineer and a corporate member of the Institute of Engineers, Malaysia (IEM). He is currently the Chairman of Tin Solder Technology Research Malaysia under the Tin Industry Board (Research and Development), Malaysia. He worked in and lectured on the subject of electronic packaging materials for more than 14 years. Before joining Universiti Malaysia Perlis, he was employed as a Failure Analysis Engineer at Intel Malaysia. He also worked part-time research officer for a few research projects on solder materials development at the University of Queensland Australia (2013-2015) and Imperial College London (2015). He has published more than 190 articles, encompassing proceedings, journals, books, and modules as primary author and co-author, and has an H-index of 16. His research endeavors were significant and impactful, as reflected in his receiving grants worth RM5.5 million.
Mohd Sharizal Abdul Aziz (Ph.D) received the B.Eng, M.Sc., and Ph.D. degrees from the Universiti Sains Malaysia, in 2006, 2012, and 2015. In June 2016, he became a Senior Lecturer at the School of Mechanical Engineering, Engineering Campus, Universiti Sains Malaysia, Penang, Malaysia. Sharizal is the author or co-author of more than 100 papers in the international journal, book chapter, and conference proceeding with the current H-index 9. He has given numerous invited/ keynote talks at international conferences. Sharizal also organized workshops on Soldering & SMT processes for academics and professionals in collaboration with the microelectronics industries in Malaysia. His research interest in Thermofluids and Computational Fluid Dynamics, focusing on Soldering, Surface Mount Technology, and Advanced Packaging. He also registered with the Board of Engineers Malaysia and a fellow Electronics Packaging Research Society, Malaysia.
Azman Jalar (Ph.D) is a professor of applied metallurgy from the Faculty of Science and Technology, and Principal Research Fellow in electronics packaging at the Institute of Microengineering and Nanoelectronics, Universiti Kebangsaan Malaysia. Graduated with PhD degree in metallurgy and materials from School of Metallurgy and Materials, University of Birmingham, UK in 2001. His interest in microstructure-properties-performance or materials science paradigm motivates him to conduct research in electronic packaging since 2002. He also interested in electronic materials, nanomaterials, materialography and stereometry. He has significantly contributed in solving many industrial-related semiconductor packaging problems through industry-driven research activities. Past and current research projects including packaging materials, solder materials and soldering, wire bonding and package architecture. Past projects collaborated with Freescale, OnSemi, AIC semiconductor, Celestica, Jabil electronics and Infineon, and ongoing projects with Nexperia, Western Digital and RedRing Solder.
Mohd Izrul Izwan Ramli (Ph.D) received his PhD from the Universiti Malaysia Perlis (UniMAP) Malaysia in materials engineering majoring in the development of solder materials . Now he works as a postdoctoral researcher in Universiti Malaysia Perlis (UniMAP) working on several projects related to the development of solder materials. His current research interest is in materials engineering and focusing on the development of lead-free solder alloys for electric/electronic interconnects. His research activities including using advance material characterizations techniques such as the synchrotron imaging, synchrotron XRF and synchrotron tomography and have contributed to several leading discoveries in solder alloy development. He has published 57 journals in leading journals in his research area with total citation 179 and H-index: 9. He also received several international research grants as co researcher during his studies and postdoctoral period. He has now more than 5 patents and copyrights in the lead-free solder alloy area.
Details
Weitere ISBN/GTIN9783030934415
ProduktartE-Book
EinbandartE-Book
FormatPDF
Format Hinweis1 - PDF Watermark
FormatE107
Erscheinungsjahr2022
Erscheinungsdatum01.03.2022
Auflage1st ed. 2022
Seiten328 Seiten
SpracheEnglisch
IllustrationenXII, 328 p. 180 illus., 143 illus. in color.
Artikel-Nr.8856416
Rubriken
Genre9200